How We Sticker and Stack Rough Cut Lumber
– Sawmill
Original post: February 14, 2021 Last Updated: December 31, 2025
Today we want to talk about stickering rough cut lumber. So, what are stickers? In sawmilling they are narrow strips of wood used between lumber when stacking. So why do we use them? Stickers are used to help air flow between the fresh cut lumber. For our mill, we typically use 1”x1” stickers.
We make our own stickers by cutting a 1” thick board into 1”x1” thin wood strips. One thing you need to be aware of when making stickers is to never utilize wood that is rotten. Also, you don’t want to use a wood for stickering that could stain your rough-cut lumber.
To start, begin with a log. Cut a slice off four sides of the log so you have a beam. Once you have a beam, cut the beam into the thickness of your stickers. In our case, this is typically 1”. Then, place the one-inch board (or multiple boards clamped together), perpendicular to the sawmill and make more 1” cuts. This will give you strips that measure 1”x1”.
Begin your lumber stack by stacking boards side by side on level surface. Make sure your lumber stack is not on the ground and level it as best as possible. You will want to stack your lumber where there is good air flow, too. Air movement is very important in the drying process. You will also want to make sure your lumber does not get too much direct sunlight. We generally make our stacks about three or four-foot-wide and up to four feet high.
Our stacks are typically moved rather quickly so we don’t sticker as much as if we were leaving the stacks to fully dry. If you intend to store the lumber until completely dry, make sure your stickers start and end within two inches of the boards and make sure you space the stickers every 18” to 24” or less depending on your species of wood. The stickers should align from the bottom of the pile to the top.
Now, Go Make Some Dust and Make it a Great Day!
Equipment in Video:
Woodmizer LT15
Disclaimer: Make Some Dust videos are for entertainment purposes only. When using any tools, machinery, finishes, and fluids always read and understand the safety and manufacturers guidelines.
Other products or information you may be interested in:
These are the boots that I wear the most. They last longer than any other type of boot I’ve owned. They are super warm and keep my feet dry. Highly recommend. – Chuck
These overalls are one of my favorites. Carhartt is a well known name and well worth the money. I own many pairs of these and they hold up to days of tough work while keeping you warm. I have several of these pairs that are now several years old. One of the best things about overalls is you can easily add or remove top layers for those days when the weather is in between temperatures. -Chuck
One of my favorite hats. It is warm and light weight. My wife says it washes up nicely. My dogs like to steel it whenever they can. – Chuck
Disclosure of Material Connection: Some of the links in this page or post may be “affiliate links”. This means that if you click on the link, (MakeSomeDust at) Pioneer Mountain Homestead, LLC may receive an affiliate commission at no direct cost to you. Pioneer Mountain Homestead, LLC only recommends products or services that the owners, managers, or employees of Pioneer Mountain Homestead, LLC use or believe will add value to the readers of this website. This disclosure is made with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”